Introduction to Oxo-Biodegradable Film
This eco-friendly film undergoes primary oxidative degradation followed by microbial biodegradation.
It is widely used for packaging electrical and electronic components, daily essentials, and agricultural products.
The film returns to nature quickly, making it especially suitable for landfill-based waste disposal environments like Korea,
where rapid breakdown is essential. Hanseo’s oxo-biodegradable films are designed to degrade
within 5–10 years, or within a customized timeframe, ultimately leaving behind only water and organic compounds.
It is widely used for packaging electrical and electronic components, daily essentials, and agricultural products.
The film returns to nature quickly, making it especially suitable for landfill-based waste disposal environments like Korea,
where rapid breakdown is essential. Hanseo’s oxo-biodegradable films are designed to degrade
within 5–10 years, or within a customized timeframe, ultimately leaving behind only water and organic compounds.
-
Biodegradable packaging for various electronic products
(Exported to UAE, used by Samsung, LG, etc.) -
Applicable to cushioning materials, agricultural products, and various other uses
Hanseo’s oxo-biodegradable films
undergo a two-stage degradation process.
undergo a two-stage degradation process.
-
step 1 Oxidative Degradation Hanseo’s oxo-biodegradable films begin to degrade once they reach the end of their service life and are disposed of in natural landfill conditions.
This initial stage is called oxidative degradation.
The PLife catalyst accelerates the degradation process, and as oxidation progresses, the polyolefin polymer chains undergo chain scission.
As a result, only very small, low-molecular-weight oxidation residues such as carboxylic acids and alcohols remain
-
step 2 Biodegradation The trace oxidation residues remaining after Step 1 are gradually composted through the decomposing activity of microorganisms in the soil.
During this stage, the residues naturally break down and are assimilated into the environment.
This process is known as biodegradation or mineralization.
Ultimately, the residues are converted into CO2, H2O, and biomass.
Step 1
Oxidative Degradation
Hanseo’s oxo-biodegradable films begin to degrade once they reach the end of their service life and are disposed of in natural landfill conditions.
This initial stage is called oxidative degradation.
The PLife catalyst accelerates the degradation process, and as oxidation progresses, the polyolefin polymer chains undergo chain scission.
As a result, only very small, low-molecular-weight oxidation residues such as carboxylic acids and alcohols remain
This initial stage is called oxidative degradation.
The PLife catalyst accelerates the degradation process, and as oxidation progresses, the polyolefin polymer chains undergo chain scission.
As a result, only very small, low-molecular-weight oxidation residues such as carboxylic acids and alcohols remain
Step 2
Biodegradation
The trace oxidation residues remaining after Step 1 are gradually composted through the decomposing activity of microorganisms in the soil.
During this stage, the residues naturally break down and are assimilated into the environment.
This process is known as biodegradation or mineralization.
Ultimately, the residues are converted into CO2, H2O, and biomass.
During this stage, the residues naturally break down and are assimilated into the environment.
This process is known as biodegradation or mineralization.
Ultimately, the residues are converted into CO2, H2O, and biomass.
Applications of Oxo-Biodegradable Films
The company holds an eco-friendly certification issued in the UAE, which is recognized across Europe and the Middle East.
Addition of
biodegradants
biodegradants
- Sun Light
- +
- Heat
- +
- Oxygen
- +
- Water
-
0% DegradationBefore compounding, Hanseo’s oxo-biodegradable resin is added to the base resin at a ratio of approximately 0.3–1%
-
Degradation CommencesDegradation begins as the polymer chain breaks down into lower molecular-weight fragments and oxidative by-products.
-
100% DegradationThe remaining trace oxidative residues are gradually decomposed through microbial and soil activity, eventually converting into compost-like material and fully assimilating into the natural environment.
Addition of biodegradants
Sun Light
Heat
Oxygen
Water
-
0% DegradationBefore compounding, Hanseo’s oxo-biodegradable resin is added to the base resin at a ratio of approximately 0.3–1%
-
Degradation CommencesDegradation begins as the polymer chain breaks down into lower molecular-weight fragments and oxidative by-products.
-
100% DegradationThe remaining trace oxidative residues are gradually decomposed through microbial and soil activity, eventually converting into compost-like material and fully assimilating into the natural environment.
-
COMPANY ADDRESS39, Sansuro 682-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12730, Republic of Korea
(554-27, Mugap-ri) -
CHIEF EXECUTIVE OFFICERHam Chang-su
-
- TEL. +82.31.798 5100
- FAX. +82.507.0328.0088
- E-MAIL. hanseo1@bill36524.com
FAMILY COMPANY
Hanseo Micron Co., Ltd.
Hanseo C&F Co., Ltd.
HYPELL Co., Ltd.
Theham Build Co., Ltd.
Hanseo C&F Co., Ltd.
HYPELL Co., Ltd.
Theham Build Co., Ltd.
Copyright © HANSEO All rights reserved.
Terms of Use
Terms and Conditions
These Terms and Conditions govern access to and use of the Hansuh Micron corporate website.
1. Informational Purpose
This website is intended to provide corporate and technical information regarding Hansuh Micron’s manufacturing capabilities and product portfolio, including:
- CPP films
- Secondary battery films
- Steel lamination films
- Eco-friendly and recycled materials
- Decorative and industrial application films
The website does not constitute an offer or contractual commitment.
2. Intellectual Property
All materials displayed on this website are owned by Hansuh Micron Co., Ltd. or used under lawful license.
No content may be reproduced, modified, transmitted, or distributed without prior written authorization.
3. Accuracy of Information
While we strive to ensure accuracy, Hansuh Micron makes no warranties regarding the completeness or reliability of website content. Product specifications may change without prior notice.
4. Limitation of Liability
Hansuh Micron shall not be liable for damages resulting from:
- Use of website information
- Temporary service interruption
- System errors or external interference
5. External Links
Links to external websites are provided for reference only. Hansuh Micron is not responsible for the content or policies of such websites.
6. Applicable Law
These Terms and Conditions shall be governed by the laws of the Republic of Korea.
7. Amendments
Hansuh Micron reserves the right to modify these Terms at any time. Continued use of the website indicates acceptance of updated Terms.
These Terms and Conditions govern access to and use of the Hansuh Micron corporate website.
1. Informational Purpose
This website is intended to provide corporate and technical information regarding Hansuh Micron’s manufacturing capabilities and product portfolio, including:
- CPP films
- Secondary battery films
- Steel lamination films
- Eco-friendly and recycled materials
- Decorative and industrial application films
The website does not constitute an offer or contractual commitment.
2. Intellectual Property
All materials displayed on this website are owned by Hansuh Micron Co., Ltd. or used under lawful license.
No content may be reproduced, modified, transmitted, or distributed without prior written authorization.
3. Accuracy of Information
While we strive to ensure accuracy, Hansuh Micron makes no warranties regarding the completeness or reliability of website content. Product specifications may change without prior notice.
4. Limitation of Liability
Hansuh Micron shall not be liable for damages resulting from:
- Use of website information
- Temporary service interruption
- System errors or external interference
5. External Links
Links to external websites are provided for reference only. Hansuh Micron is not responsible for the content or policies of such websites.
6. Applicable Law
These Terms and Conditions shall be governed by the laws of the Republic of Korea.
7. Amendments
Hansuh Micron reserves the right to modify these Terms at any time. Continued use of the website indicates acceptance of updated Terms.
Privacy Policy
Privacy Policy
Hansuh Micron Co., Ltd. (“Hansuh Micron”) collects limited personal information through its website inquiry form solely for business communication purposes. This notice explains how such information is handled.
1. Personal Data We Collect
When you submit an inquiry through our website, we may collect the following information:
- Full Name
- Phone Number
- Email Address
- Message Content (including any information voluntarily provided)
This information is provided directly by the user.
2. Purpose of Processing
Personal information collected through the inquiry form is used exclusively for:
- Responding to your inquiry
- Providing product or technical information
- Handling partnership or business proposals
- Internal communication related to your request
Hansuh Micron does not use inquiry information for unrelated marketing purposes.
3. Legal Basis and Consent
By checking the consent box before submission, you agree to the collection and use of your personal information as described in this notice.
You may withdraw your consent at any time by contacting us.
4. Retention Period
Personal information submitted through the inquiry form will be retained only for as long as necessary to respond to your request and maintain related business records.
Once the purpose has been fulfilled, the information will be securely deleted in accordance with applicable regulations.
5. Disclosure to Third Parties
Hansuh Micron does not sell or disclose personal information to third parties, except:
- To website hosting or IT maintenance providers under confidentiality obligations
- When required by applicable laws
6. Data Protection Measures
We implement reasonable technical and administrative measures to protect personal data against unauthorized access, misuse, alteration, or disclosure.
7. Contact for Privacy Matters
For any privacy-related questions or requests, please contact:
Hansuh Micron Co., Ltd.
Republic of Korea
Email: jhw7638@ehanseo.com
Hansuh Micron Co., Ltd. (“Hansuh Micron”) collects limited personal information through its website inquiry form solely for business communication purposes. This notice explains how such information is handled.
1. Personal Data We Collect
When you submit an inquiry through our website, we may collect the following information:
- Full Name
- Phone Number
- Email Address
- Message Content (including any information voluntarily provided)
This information is provided directly by the user.
2. Purpose of Processing
Personal information collected through the inquiry form is used exclusively for:
- Responding to your inquiry
- Providing product or technical information
- Handling partnership or business proposals
- Internal communication related to your request
Hansuh Micron does not use inquiry information for unrelated marketing purposes.
3. Legal Basis and Consent
By checking the consent box before submission, you agree to the collection and use of your personal information as described in this notice.
You may withdraw your consent at any time by contacting us.
4. Retention Period
Personal information submitted through the inquiry form will be retained only for as long as necessary to respond to your request and maintain related business records.
Once the purpose has been fulfilled, the information will be securely deleted in accordance with applicable regulations.
5. Disclosure to Third Parties
Hansuh Micron does not sell or disclose personal information to third parties, except:
- To website hosting or IT maintenance providers under confidentiality obligations
- When required by applicable laws
6. Data Protection Measures
We implement reasonable technical and administrative measures to protect personal data against unauthorized access, misuse, alteration, or disclosure.
7. Contact for Privacy Matters
For any privacy-related questions or requests, please contact:
Hansuh Micron Co., Ltd.
Republic of Korea
Email: jhw7638@ehanseo.com